Airbot Hypersonic Pro Manual May 2026

Allow filters to air dry for at least 24 hours before reinserting. Using wet filters can damage the motor.

Check for a blockage in the wand or the floor head. If the airway is clear, ensure the HEPA filter is clean. airbot hypersonic pro manual

Slide the battery pack into the slot at the base of the handle. It should lock firmly in place. Allow filters to air dry for at least

The Hypersonic Pro uses a multi-stage HEPA system. Twist the top of the dust cup to remove the HEPA filter. Pull out the stainless steel pre-filter. Wash both under cold water. If the airway is clear, ensure the HEPA filter is clean

To maintain peak 27kPa suction, regular maintenance is vital.

Insert the metal extension tube into the main motor body until you hear a click.

This often indicates the filters were put back while still damp. Remove and clean the filters and allow the unit to air out. Safety Precautions Do not use the vacuum to pick up liquids or wet debris. Avoid vacuuming hot ashes, glass shards, or sharp objects.