Because this is an older "W" characteristic charger, the charging current will naturally drop as the battery voltage rises. You should monitor the battery temperature and charge status manually.
IP30 (basic indoor protection; not waterproof). Weight: Approximately 1.5 kg. Operating Instructions Bosch Kl 1206 Manual
The is a robust, legacy 12V car battery charger designed for standard lead-acid batteries . While newer "C-Line" smart chargers have since replaced it in the modern lineup, many KL 1206 units remain in service due to their durable transformer-based design. Core Specifications Voltage Support: 12V. Charging Current: Effective 6A; arithmetic 4A. Because this is an older "W" characteristic charger,
Suitable for batteries ranging from 20 Ah to 90 Ah . Power Consumption: 85 W. Input Voltage: 230V / 50-60 Hz. Weight: Approximately 1
Using a manual charger like the KL 1206 requires more attention than modern "plug-and-forget" smart chargers, as it may not automatically stop when the battery is full.
Connect the clamp to a metal point on the vehicle chassis (away from fuel lines) or directly to the negative (-) terminal if the battery is removed from the car. Powering On: Plug the charger into a 230V mains outlet.
Once the battery is charged, unplug the AC power first before removing the clamps from the battery terminals. Safety Warnings BOSCH KL 1206 E ➤ AUTODOC