Canon G3400 Reset Updated -

Resetting your Canon PIXMA G3400 is a common maintenance task, typically required to clear the (full ink absorber) or to restore factory settings for network troubleshooting. How to Reset the Ink Absorber (Error 5B00)

Press and hold the Stop button until the Alarm lamp flashes 24 times , then release it. This restores all machine settings to their original factory defaults. Resetting After Ink Filling canon g3400 reset

Release both buttons. Wait for the green power light to stop flashing and stay solid. Press the Stop button 5 times . Resetting your Canon PIXMA G3400 is a common

Press and hold the Stop button until the Alarm lamp flashes 23 times , then release it. Resetting After Ink Filling Release both buttons

Press the button once. The printer will reset the internal counter and may print a page showing D=000.0 , confirming the reset. Turn the printer off and then back on to exit Service Mode. Factory Reset (Settings & Network)

If you have just refilled the ink tanks and are seeing air bubbles in the tubes, you can trigger a system-wide ink flush:

The 5B00 error indicates that the waste ink counter has reached its limit. You can reset this manually by entering : Enter Service Mode: Turn off the printer but keep it plugged in. Press and hold the Stop button (red triangle icon). While holding Stop, press and hold the Power button.