Vi använder cookies och annan data i statistiksyfte och för funktionalitet såsom kundvagn mm. på sidan.
Genom att fortsätta använda webbutiken accepterar du vår dataskyddspolicy.
Decastar 150e Manual Top < QUICK ✭ >
CHAT öppettider
M: 12-20 T-T: 12-18 F: 12-15
0

Cut off the bent end of the wire cleanly. Feed it into the wire feed input (approximately 50–100 mm) towards the torch neck.

Proper setup is critical for maintaining a stable arc and preventing wire jams.

MIG (Metal Inert Gas), MAG (Metal Active Gas), and Gasless (Flux-cored). Top Control Functions and Panel Layout

Understanding the machine's limits is the first step in successful operation. 230V Single Phase. Welding Current Range: 30 – 145 Amps. Duty Cycle: 35% (calculated over a 10-minute cycle). Power Consumption: 1.7 kW.

Remove the gas nozzle and contact tube from the torch head before feeding the wire through to the tip.

The machine typically features a multi-step switch to adjust the welding current.

The DECASTAR 150E focuses on manual precision, allowing the user to manage heat and penetration through several key controls.

Open the reel compartment door and secure the wire spool on the reel. Ensure the reel pulling pin is correctly housed.

Decastar 150e Manual Top < QUICK ✭ >

Cut off the bent end of the wire cleanly. Feed it into the wire feed input (approximately 50–100 mm) towards the torch neck.

Proper setup is critical for maintaining a stable arc and preventing wire jams.

MIG (Metal Inert Gas), MAG (Metal Active Gas), and Gasless (Flux-cored). Top Control Functions and Panel Layout decastar 150e manual top

Understanding the machine's limits is the first step in successful operation. 230V Single Phase. Welding Current Range: 30 – 145 Amps. Duty Cycle: 35% (calculated over a 10-minute cycle). Power Consumption: 1.7 kW.

Remove the gas nozzle and contact tube from the torch head before feeding the wire through to the tip. Cut off the bent end of the wire cleanly

The machine typically features a multi-step switch to adjust the welding current.

The DECASTAR 150E focuses on manual precision, allowing the user to manage heat and penetration through several key controls. MIG (Metal Inert Gas), MAG (Metal Active Gas),

Open the reel compartment door and secure the wire spool on the reel. Ensure the reel pulling pin is correctly housed.