Ml194v-0 Motherboard Manual - Foxconn

2 x DDR3 DIMM slots (Supports up to 16GB of DDR3 1066/1333/1600 MHz RAM). Expansion: 1 x PCIe x16 (for dedicated graphics). 1 x PCIe x1 (for smaller expansion cards).

LGA 1155 (Supports 2nd and 3rd Generation Intel Core i3, i5, i7, and Pentium processors). Chipset: Intel H61.

To reset BIOS settings to factory defaults, locate the 3-pin jumper near the battery. FOXCONN ML194V-0 MOTHERBOARD MANUAL

Move the jumper cap from pins 1-2 (Normal) to pins 2-3 (Clear) for 10 seconds while the PC is off. Return the cap to pins 1-2 before restarting.

Below is a comprehensive technical guide based on standard specifications for this hardware. 1. Key Technical Specifications 2 x DDR3 DIMM slots (Supports up to

The Foxconn ML194V-0 is typically a Micro-ATX or laptop-specific motherboard designed for mid-range systems of the early 2010s.

Press F2 or Delete repeatedly during the initial splash screen to enter the BIOS setup utility. 3. Drivers and Support ITX Series of Motherboards User Manual LGA 1155 (Supports 2nd and 3rd Generation Intel

4 x SATA 2.0 or 3.0 ports (depending on specific revision). I/O Panel: Standard VGA, USB 2.0/3.0, and Gigabit Ethernet. 2. BIOS and Jumper Settings