Use the Windows Setup Executable which automatically installs both Virtual COM Port (VCP) and D2XX drivers for Windows 7, 8, 10, and 11.
If you have an internet connection, Windows will often attempt to download and install the driver via as soon as the device is plugged in. Wait a few moments and check your Device Manager under "Ports (COM & LPT)" to see if a "USB Serial Port" has appeared. 2. Manual Installation Steps ft231x usb uart driver link
Open Device Manager (Win + X > Device Manager). Look for USB Serial Port (COMx) under "Ports (COM & LPT)". Key Specifications of the Specification Data Transfer Rate 300 Baud to 3 Mbaud USB Protocol USB 2.0 Full Speed (12 Mbps) UART Signals TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI I/O Voltage 1.8V to 3.3V (5V Tolerant) Buffers 512-byte Receive, 512-byte Transmit Drivers - FTDI Key Specifications of the Specification Data Transfer Rate
, then follow the wizard prompts to accept the license agreement. Connect device to a USB port. 512-byte Transmit Drivers - FTDI
Available on the FTDI VCP Drivers page. Note that newer macOS versions (10.15 and later) may require the "Dext" version of the driver. Linux Drivers:
is part of the FTDI "X-Series" chips, designed for high-speed data transfer (up to 3MBaud) with full handshake support. Official FT231X USB UART Driver Links