If your PC shows a "Code 10" error in Device Manager, you likely have an older "counterfeit" Prolific chip in your cable. You may need to roll back to an older driver version (2007/2008) to fix this.
In this guide, we’ll dive into everything you need to know about setting up, using, and troubleshooting the software to ensure your fleet communicates flawlessly. Why Use Programming Software for the TC-500? Hyt Tc-500 Programming Software
If your team works in an environment with high electronic interference (like a construction site), you can increase the squelch level within the software to ensure the speakers only activate when a strong, clear signal is received. Battery Saver & Timeout Timer (TOT) If your PC shows a "Code 10" error
In the software, go to the or "Communication Port" menu. Select the COM port that matches your cable. Why Use Programming Software for the TC-500
The main grid is where you’ll spend most of your time. Here, you can enter the and Transmit (TX) frequencies. If you are using a repeater, these will be different; for "simplex" (radio-to-radio), they will be the same. Squelch Levels
Program specific UHF or VHF frequencies to the 16 available channels.
Locate the legitimate software package (often labeled or TC-500 CPS ). Run the setup file and follow the prompts. Once installed, it is highly recommended to restart your computer to ensure the drivers are fully integrated. 2. Connecting the Radio Connect the USB cable to your PC.