Kolbus Da 36 Manual //top\\ May 2026

Bring the glue to the manufacturer’s recommended temperature (typically 130°C to 150°C for animal glues).

10 to 15 cycles per minute (depending on age, materials, and condition) Kolbus Da 36 Manual

The glue may be too thin, cold, or the pressing roller tension is insufficient. Adjust the pre-melter temperature or tighten the forming station rollers. Manually advance the machine using the handwheel to

Manually advance the machine using the handwheel to verify that the arms lift, transport, and place the material accurately. Step 5: Run Test Cases 4. Transfer and Case Assembly

The Kolbus DA 36 was built for medium to high-volume production of hard book covers, rigid box components, and files. Below are the standard mechanical parameters for the machine: 405 x 560 mm Minimum Opened Case Size: 110 x 155 mm Spine Insert Width: 8 mm to 80 mm Maximum Speed: Up to 36 cycles per minute

Allows operators to melt supplementary glue ahead of time to avoid machine downtime during long runs. 4. Transfer and Case Assembly