Liz Ocean Wsg 32 Install Now

The WSG 32 requires a path to discharge wastewater during its regeneration cycle.

Ensure there is a physical air gap between the end of the drain hose and the waste receptor to prevent back-siphonage.

Identify the "In" and "Out" ports on the WSG 32 control valve. Reversing these will prevent the system from functioning. liz ocean wsg 32 install

Open the lowest faucet in the building to drain remaining water from the pipes.

The LIZ Ocean WSG 32 is a high-performance water purification and softening system designed for residential and light commercial use. Installing this unit ensures your home is protected from scale buildup and contaminants, but proper setup is crucial for peak performance. The WSG 32 requires a path to discharge

Inspect every joint. If a leak is found, shut off the water immediately and tighten the fitting. Power Up: Plug the WSG 32 into a dedicated GFI outlet.

💡 Check the brine tank monthly and keep it at least one-third full.💡 Sanitize: Use a water softener cleaner once every six months to remove iron and resin buildup.💡 Check Bridge: Occasionally break up any "salt bridges" (hard crusts) that form in the brine tank. Reversing these will prevent the system from functioning

Ensure the brine tank and resin tank are standing perfectly upright.