Maintenance Box Resetter For Epson L6170 -

: Press the resetter firmly against the chip. The LED on the resetter will usually flash red , then turn solid green to indicate a successful reset.

: Most L6170 resetters have a specific pin layout—typically 4 pins on top and 3 on the bottom . Align these exactly with the copper contacts on the T04D1 chip.

The maintenance box (part number ) is an internal container that collects waste ink during initial setup and routine print head cleaning cycles. It features a green microchip that tracks ink levels; once it reaches 100% capacity, the printer locks all operations to prevent ink overflow and internal damage. How a Maintenance Box Resetter Works maintenance box resetter for epson l6170

: It reduces plastic waste by extending the life of the original maintenance box. Step-by-Step: Resetting the Epson L6170 Maintenance Box

: Locate the panel on the rear or side of your printer (usually secured by a single screw), slide it off, and pull the T04D1 box out. : Press the resetter firmly against the chip

Before resetting the chip, it is crucial to either or ensure the box isn't physically overflowing with liquid ink to avoid a mess.

: Slide the maintenance box back into the printer and power it on. The "End of Service Life" error should disappear, and your ink level indicator will show a full maintenance tank. Hardware vs. Software Resetters Align these exactly with the copper contacts on

A chip resetter is a small electronic device that communicates with the T04D1 maintenance tank chip. By physically connecting the resetter’s pins to the chip’s contacts, you can manually override the internal counter, tricking the printer into recognizing the box as "empty".