Always charge in a well-ventilated area, as batteries emit explosive gases.
Ideal for small batteries or maintaining a full charge over long periods.
The 11-1568 model typically features a heavy-duty design with several operational modes: motomaster battery charger 111568 manual
For a battery still in a vehicle, attach the Black clamp to a heavy, unpainted metal part of the engine block or chassis—away from the battery and moving parts. If the battery is out of the vehicle, attach a 24-inch 6-gauge insulated cable to the negative post first, then connect the black clamp to that cable.
Find the Positive (RED, +) and Negative (BLACK, -) terminals. The positive post is usually larger in diameter. Always charge in a well-ventilated area, as batteries
Attach the Red clamp to the positive terminal of the battery.
Quickly restores power to medium-to-large 12V batteries. If the battery is out of the vehicle,
Switch to the 70A "Engine Start" mode. Do not attempt to use this setting for more than 5 seconds at a time, followed by a 4-minute cool-down period to prevent overheating the charger. Maintenance and Troubleshooting