Qidi X-pro Manual -

Take out the protective foam and cut the plastic ties securing the extruders. Ensure you remove the belt fixing clips from both sides of the Y-axis.

Check the power supply setting on the back or side of the machine to ensure it matches your local standard (110V or 220V) before turning it on. qidi x-pro manual

The X-Pro arrives nearly ready to use, though some critical assembly and removal of shipping materials are required. Take out the protective foam and cut the

The dual extruder assembly must be manually secured with two screws (typically 2.5mm). Orient the nozzles so the fans face forward. The X-Pro arrives nearly ready to use, though

Plug the power cord into the lower-left corner at the back and use the primary power switch to start the machine. Calibration and Bed Leveling

The X-Pro uses assisted manual leveling via its 4.3-inch touchscreen to ensure a flat printing surface.