Samsung C3322 Flash File And Tool __full__ -

Power off the phone and remove the battery for 5 seconds, then reinsert it.

In the tool, set the to LSI6410 and Port to USB0 . Click Start or Start USB1 to put the tool in standby mode. samsung c3322 flash file and tool

Click and browse to select the C3322_LAKOTA_Setting_v00.mdl configuration file found in the tool's directory. 2. Loading the Firmware Files Power off the phone and remove the battery

Press and hold the Volume Down + Lock (Power) keys (some versions may require holding 1 + 3 or Volume Down + Lock + Camera ). Click and browse to select the C3322_LAKOTA_Setting_v00

Load the following files into their respective slots in the tool:

Wait for the progress bar to finish. A green message indicates a successful flash. Disconnect the phone, reinsert the battery, and power it on. Note that the first boot may take several minutes. Common Troubleshooting How To Flash Stock Firmware For Any Samsung Phones