Sc569-00 Ricoh May 2026

Open the right-side door and verify that the fuser film and pressure roller are not physically damaged.

Worn fuser films, damaged pressure rollers, or seized bearings can increase the physical load on the motor, causing it to stall. sc569-00 ricoh

Because fusing-related errors are often flagged for safety, they frequently require a manual software reset even after the physical problem is resolved. 1. Hardware Inspection Open the right-side door and verify that the

Ensure all harnesses to the pressure release motor and sensors are firmly seated. YouTube·Copier Tech - MVP Quang Tình The pressure release motor may be locked due

The pressure roller HP sensor (often designated as S26 or SEN60) may be disconnected, dirty, or defective.

The pressure release motor may be locked due to an excessive load, or the motor driver itself could be defective.

When this error appears, it typically points to a mechanical or electrical failure within the fuser unit's pressure release system.