0.3% measurement accuracy with a maximum resolution of 0.1°C for thermocouples and RTDs.
The is a high-precision PID (Proportional-Integral-Derivative) temperature controller designed for industrial and laboratory applications where tight temperature control is essential. Featuring a four-digit LED display and an accuracy rating of 0.3%, this device is compatible with various sensors and power supplies, making it a versatile tool for automation. Key Specifications and Features sinotimer mc101 manual
Connect the resistor element between Terminals 8 and 9 , with the third "extra" wire going to Terminal 10 . Control Output: Key Specifications and Features Connect the resistor element
Correct wiring is critical for safe operation. Always disconnect power before making connections. Refer to the specific diagram on your unit's label for the most accurate pinouts. Refer to the specific diagram on your unit's
Hold the (or SET + <) keys for 3 seconds to enter the menu. Use the arrows to find the "Unit" parameter. Change the value from 000 (Celsius) to 001 (Fahrenheit). Hold the MODE key for 3 seconds to exit and save. Entering PID Auto-Tuning:
Set "AT" to 1. The AT light on the panel will blink until the cycle is complete and the controller has calculated its PID constants.