Smartctl Open Device Dev Sda Failed Dell Or Megaraid Controller Please Try Adding 39d Megaraid N 39 Extra Quality May 2026

When running smartctl on a Dell PowerEdge server or any system using a MegaRAID (LSI/Broadcom) controller, you often encounter this error: Smartctl open device: /dev/sda failed: Dell or MegaRAID controller, please try adding '-d megaraid,N' .

Fix: smartctl "Open Device Failed" on Dell or MegaRAID Controllers When running smartctl on a Dell PowerEdge server

: Locate the DID column in the "Drive Information" table. If your disk is in slot 1 and has a DID of 11 , then 2. Run the Correct smartctl Command Run the Correct smartctl Command This happens because

This happens because the operating system sees a (the RAID array), but smartctl needs to talk directly to the physical disks hidden behind the controller. The Solution: Using the -d megaraid,N Flag please try adding '-d megaraid

To bypass the virtual layer, you must tell smartctl which specific physical disk you want to inspect by providing its (represented as 1. Find the Physical Device ID (