: Ensure the gas valve is fully open and the gas supply is not interrupted. Try turning the tap off and on again after 10 seconds to reset the ignition sequence.
: Used to transfer control between multiple remotes (e.g., bathroom and kitchen). A lit indicator means that specific remote has control over temperature settings. Operation Indicator : Green : The unit is in standby mode. Yellow : The unit is currently operating and heating water. tgc bc901h manual
: If you have multiple remotes, press the Priority button until the indicator lights up. You cannot switch priority while water is currently running. Set Temperature : Use the and buttons. The adjustable range is typically 35∘C35 raised to the composed with power cap C to 60∘C60 raised to the composed with power cap C . : Ensure the gas valve is fully open
: Requires professional inspection. Contact Towngas Customer Service at 2232 1111 . A lit indicator means that specific remote has
: If the heater is idle for more than 10 minutes, "Priority" is automatically released, and the indicator will turn off.
interface is built for high-speed scannability and ease of use:
: If your unit supports a circulation loop, press the Pre-heat button to warm the pipes before use. The maximum pre-heat temperature is capped at 50∘C50 raised to the composed with power cap C for safety. Troubleshooting & Error Codes If the unit malfunctions, the will flash a specific number on the digital display.
