Urmet 1131 Manual Full !!install!! May 2026

The (Electronic Call) is an analog 4+n system handset designed for clear audio communication and door access control. This model serves as a direct replacement for the 1133 Atlantico and is compatible with most analog systems using electronic call tones. Urmet 1131 Terminal Identification

: Lift the handset and check for a dial tone or background noise from the street. Have someone speak at the door station to verify clarity. urmet 1131 manual full

: Insert each wire into the corresponding terminal (CA, 1, 2, 6, 9/10) and tighten the screws firmly. The (Electronic Call) is an analog 4+n system

To ensure a successful installation, you must map your existing wires to the correct numbered terminals on the Urmet 1131 Description Call Electronic call signal from the outdoor panel 1 Speaker Incoming speech from the door panel to the handset 2 Microphone Outgoing speech from the handset to the door panel 6 Ground (0V) Common ground for all audio and lock functions 9 / 10 Lock Release Contact points for triggering the electric door lock Step-by-Step Installation Guide Have someone speak at the door station to verify clarity

by pressing the small tab at the bottom. Position the base on the wall and mark the mounting holes. Secure it using the provided screws and wall plugs.

: Open your old handset and take a clear photo of the connections. Label each wire based on its terminal number rather than its color, as color standards vary greatly between buildings. Mounting the Base : Remove the cover of the Urmet 1131