Pull the three rotary knobs off. Remove the screws behind them to loose the heater control panel. You do not necessarily need to disconnect the cables; you can often push the unit back into the dash cavity.
If you are doing this to change the heater matrix, now is the time to clean the surrounding air ducts.
Slowly pull the dashboard toward the rear of the car by about two inches. vw polo 6n dashboard removal updated
You cannot pull the dash out while the steering wheel and center console are in place.
Remove the fuse box cover and the lower shelf/kick panel. This will expose the main wiring harness and the steering column mounting bolts. Step 5: Unbolting the Main Dashboard Pull the three rotary knobs off
Removing the dashboard from a Volkswagen Polo 6N (produced roughly between 1994 and 1999) is a significant undertaking. Whether you are replacing a leaking heater matrix, upgrading your interior, or fixing persistent rattles, this guide provides an updated, step-by-step approach to help you navigate the process safely. Preparation and Tools
The dashboard is held by a combination of visible screws and hidden bolts. If you are doing this to change the
Remove the screws from the underside of the steering column plastic and pull the top and bottom halves apart.