Woodzig Model 40268 Manual Updated |work| -

Replace the cover and tighten the tension screw clockwise until there is a 1–2 mm gap between the chain and the bottom of the guide bar. Maintenance Tips Woodzig model 40268 manual

Use the included hex wrench to unscrew the drive cover bolt and remove the sprocket cover. woodzig model 40268 manual updated

Never cut above shoulder level or while standing on a ladder. Ensure others are at least two tree lengths away from the work area. Assembly and Chain Installation Replace the cover and tighten the tension screw

Slide the chain drive links into the guide bar's groove and place the guide bar over the tension pin. woodzig model 40268 manual updated