Xh-m608 Manual May 2026

Relay output (works as a switch for your charger or load). Dimensions: Approximately 66 x 46 x 16mm.

For a 12V battery, you might set P1 to 10.8V and P2 to 14.4V to automate the charging cycle. P3: Timer Function Set this to 0 to disable the timer. Xh-m608 Manual

The relay on the board should be placed "in-line" with one of the wires (typically the positive) of your charger or load. Relay output (works as a switch for your charger or load)

The relay does not function; it only displays the current voltage. P3: Timer Function Set this to 0 to disable the timer

The is a versatile DC 6-40V battery charge and discharge controller module designed for real-time voltage monitoring and automated protection . Whether you are managing a solar bank, an electric vehicle battery, or a DIY power station, this manual provides the essential steps for wiring, programming, and operating the device safely. 1. Technical Specifications